30 watt Smart Charger for TBM-700/850
The new 30 watt smart USB charger attaches to the base plate of the mount with 3M Dual Lock tape. The power source for the charger is the chart lighting circuit. Your shop will need to make a short two wire cable between the chart holder and the charger unless you already have one that supported our original USB-A dual port charger.
This charger has a USB-A port and a USB-C Power Delivery (PD) port which can supply 30 watts to any iPad that supports the PD fast charge feature. PD will support many iPads with a Lightning connector as well as the newer USB-C iPads.
You will need to supply a short USB cable between the charger and your iPad. Buy either a USB-C to USB-C cable that supports 60 watt charging or a USB-C to Lightning cable. See list below for iPads that support PD charging via a Lightning cable. If yours is not on the list, buy a short USB-A to Lightning cable and use the USB-A port on the charger. Note: All iPads with USB-C ports support PD fast charging.
Any cable 18” or longer will allow rotating the iPad between portrait and landscape modes.
List of iPads with Lighting ports that support fast PD charging:
iPad Air (3rd gen), iPad mini 5, iPad Pro 10.5″, iPad Pro 11″